Table of Contents

nf-core/rnaseq: Output

This document describes the output produced by the pipeline. Most of the plots are taken from the MultiQC report, which summarises results at the end of the pipeline.

Pipeline overview

The pipeline is built using Nextflow and processes data using the following steps:

FastQC

FastQC gives general quality metrics about your reads. It provides information about the quality score distribution across your reads, the per base sequence content (%T/A/G/C). You get information about adapter contamination and other overrepresented sequences.

For further reading and documentation see the FastQC help.

NB: The FastQC plots displayed in the MultiQC report shows untrimmed reads. They may contain adapter sequence and potentially regions with low quality. To see how your reads look after trimming, look at the FastQC reports in the trim_galore directory.

Output directory: results/fastqc

TrimGalore

The nfcore/rnaseq pipeline uses TrimGalore for removal of adapter contamination and trimming of low quality regions. TrimGalore uses Cutadapt for adapter trimming and runs FastQC after it finishes.

MultiQC reports the percentage of bases removed by TrimGalore in the General Statistics table, along with a line plot showing where reads were trimmed.

Output directory: results/trim_galore

Contains FastQ files with quality and adapter trimmed reads for each sample, along with a log file describing the trimming.

Single-end data will have slightly different file names and only one FastQ file per sample.

SortMeRNA

When --removeRiboRNA is specified, nfcore/rnaseq pipeline uses SortMeRNA for removal of rRNA. SortMeRNA requires reference sequences and these are by default from the SILVA database.

Output directory: results/SortMeRNA

Contains FastQ files with quality and adapter trimmed reads for each sample, along with a log file describing the trimming.

Single-end data will have slightly different file names (reads/sample.fq.gz) and only one FastQ file per sample.

STAR

STAR is a read aligner designed for RNA sequencing. STAR stands for Spliced Transcripts Alignment to a Reference, it produces results comparable to TopHat (the aligned previously used by NGI for RNA alignments) but is much faster.

The STAR section of the MultiQC report shows a bar plot with alignment rates: good samples should have most reads as Uniquely mapped and few Unmapped reads.

STAR

Output directory: results/STAR

RSeQC

RSeQC is a package of scripts designed to evaluate the quality of RNA seq data. You can find out more about the package at the RSeQC website.

This pipeline runs several, but not all RSeQC scripts. All of these results are summarised within the MultiQC report and described below.

Output directory: results/rseqc

These are all quality metrics files and contains the raw data used for the plots in the MultiQC report. In general, the .r files are R scripts for generating the figures, the .txt are summary files, the .xls are data tables and the .pdf files are summary figures.

BAM stat

Output: Sample_bam_stat.txt

This script gives numerous statistics about the aligned BAM files produced by STAR. A typical output looks as follows:

#Output (all numbers are read count)
#==================================================
Total records:                                 41465027
QC failed:                                     0
Optical/PCR duplicate:                         0
Non Primary Hits                               8720455
Unmapped reads:                                0

mapq < mapq_cut (non-unique):                  3127757
mapq >= mapq_cut (unique):                     29616815
Read-1:                                        14841738
Read-2:                                        14775077
Reads map to '+':                              14805391
Reads map to '-':                              14811424
Non-splice reads:                              25455360
Splice reads:                                  4161455
Reads mapped in proper pairs:                  21856264
Proper-paired reads map to different chrom:    7648

MultiQC plots each of these statistics in a dot plot. Each sample in the project is a dot - hover to see the sample highlighted across all fields.

RSeQC documentation: bam_stat.py

Infer experiment

Output: Sample_infer_experiment.txt

This script predicts the mode of library preparation (sense-stranded or antisense-stranded) according to how aligned reads overlay gene features in the reference genome. Example output from an unstranded (~50% sense/antisense) library of paired end data:

From MultiQC report: infer_experiment

From the infer_experiment.txt file:

This is PairEnd Data
Fraction of reads failed to determine: 0.0409
Fraction of reads explained by "1++,1--,2+-,2-+": 0.4839
Fraction of reads explained by "1+-,1-+,2++,2--": 0.4752

RSeQC documentation: infer_experiment.py

Junction saturation

Output:

This script shows the number of splice sites detected at the data at various levels of subsampling. A sample that reaches a plateau before getting to 100% data indicates that all junctions in the library have been detected, and that further sequencing will not yield more observations. A good sample should approach such a plateau of Known junctions, very deep sequencing is typically requires to saturate all Novel Junctions in a sample.

None of the lines in this example have plateaued and thus these samples could reveal more alternative splicing information if they were sequenced deeper.

Junction saturation

RSeQC documentation: junction_saturation.py

RPKM saturation

Output:

This tool resamples a subset of the total RNA reads and calculates the RPKM value for each subset. We use the default subsets of every 5% of the total reads. A percent relative error is then calculated based on the subsamples; this is the y-axis in the graph. A typical PDF figure looks as follows:

RPKM saturation

A complex library will have low resampling error in well expressed genes.

This data is not currently reported in the MultiQC report.

RSeQC documentation: RPKM_saturation.py

Read duplication

Output:

This plot shows the number of reads (y-axis) with a given number of exact duplicates (x-axis). Most reads in an RNA-seq library should have a low number of exact duplicates. Samples which have many reads with many duplicates (a large area under the curve) may be suffering excessive technical duplication.

Read duplication

RSeQC documentation: read_duplication.py

Inner distance

Output:

The inner distance script tries to calculate the inner distance between two paired RNA reads. It is the distance between the end of read 1 to the start of read 2, and it is sometimes confused with the insert size (see this blog post for disambiguation): inner distance concept

Credit: modified from RSeQC documentation.

Note that values can be negative if the reads overlap. A typical set of samples may look like this: Inner distance

This plot will not be generated for single-end data. Very short inner distances are often seen in old or degraded samples (eg. FFPE).

RSeQC documentation: inner_distance.py

Read distribution

Output: Sample_read_distribution.txt

This tool calculates how mapped reads are distributed over genomic features. A good result for a standard RNA seq experiments is generally to have as many exonic reads as possible (CDS_Exons). A large amount of intronic reads could be indicative of DNA contamination in your sample or some other problem.

Read distribution

RSeQC documentation: read_distribution.py

Junction annotation

Output:

Junction annotation compares detected splice junctions to a reference gene model. An RNA read can be spliced 2 or more times, each time is called a splicing event.

Junction annotation

RSeQC documentation: junction_annotation.py

Qualimap

Qualimap is a standalone package written in java. It calculates read alignment assignment, transcript coverage, read genomic origin, junction analysis and 3'-5' bias.

Output directory: results/qualimap

Qualimap RNAseq documentation: Qualimap docs.

dupRadar

dupRadar is a Bioconductor library for R. It plots the duplication rate against expression (RPKM) for every gene. A good sample with little technical duplication will only show high numbers of duplicates for highly expressed genes. Samples with technical duplication will have high duplication for all genes, irrespective of transcription level.

dupRadar

Credit: dupRadar documentation

Output directory: results/dupRadar

DupRadar documentation: dupRadar docs

Preseq

Preseq estimates the complexity of a library, showing how many additional unique reads are sequenced for increasing the total read count. A shallow curve indicates that the library has reached complexity saturation and further sequencing would likely not add further unique reads. The dashed line shows a perfectly complex library where total reads = unique reads.

Note that these are predictive numbers only, not absolute. The MultiQC plot can sometimes give extreme sequencing depth on the X axis - click and drag from the left side of the plot to zoom in on more realistic numbers.

preseq

Output directory: results/preseq

featureCounts

featureCounts from the subread package summarises the read distribution over genomic features such as genes, exons, promotors, gene bodies, genomic bins and chromosomal locations. RNA reads should mostly overlap genes, so be assigned.

featureCounts

We also use featureCounts to count overlaps with different classes of features. This gives a good idea of where aligned reads are ending up and can show potential problems such as rRNA contamination. biotypes

Output directory: results/featureCounts

Salmon

Salmon from Ocean Genomics quasi-maps and quantifies expression relative to the transcriptome.

Output directory: results/salmon

tximport

tximport imports transcript-level abundance, estimated counts and transcript lengths, and summarizes into matrices for use with downstream gene-level analysis packages. Average transcript length, weighted by sample-specific transcript abundance estimates, is provided as a matrix which can be used as an offset for different expression of gene-level counts.

Output directory: results/salmon

Index files

Output directory: results/reference_genome/salmon_index

Quantification output

Output directory: results/salmon

StringTie

StringTie assembles RNA-Seq alignments into potential transcripts. It assembles and quantitates full-length transcripts representing multiple splice variants for each gene locus.

StringTie outputs FPKM metrics for genes and transcripts as well as the transcript features that it generates.

Output directory: results/stringtie

Sample Correlation

edgeR is a Bioconductor package for R used for RNA-seq data analysis. The script included in the pipeline uses edgeR to normalise read counts and create a heatmap showing Pearson's correlation and a dendrogram showing pairwise Euclidean distances between the samples in the experiment. It also creates a 2D MDS scatter plot showing sample grouping. These help to show sample similarity and can reveal batch effects and sample groupings.

Heatmap:

heatmap

MDS plot:

mds_plot

Output directory: results/sample_correlation

MultiQC

MultiQC is a visualisation tool that generates a single HTML report summarising all samples in your project. Most of the pipeline QC results are visualised in the report and further statistics are available in within the report data directory.

The pipeline has special steps which allow the software versions used to be reported in the MultiQC output for future traceability.

Output directory: results/multiqc

For more information about how to use MultiQC reports, see http://multiqc.info