# Rdpack 2.6.1 - R-devel c86938 turned to error the warning for a non-existing key in the bib file. Fixed `insert_bib` (and a related test) to handle that. # Rdpack 2.6 - fixed issues causing 'lost braces' (actually, superfluous braces) NOTEs from checks in R-devel occuring with some accented LaTeX characters. These NOTEs are not yet activated on CRAN but if/when they do, developers using Rd macros `\insertRef` and `\insertCite` can eliminate them by building their packages with Rdpack (>= 2.6) and rbibutils (>= 2.2.16). Thanks to Sebastian Meyer for tracing down the issues. - fixed a `Sweave` expression in 'man/predefined.Rd' to not emit unnecessary braces (see the note above). # Rdpack 2.5 - Rd macros `insertCite` and friends were calling `\insert_citeOnly()` with argument `key` instead of `keys`. This was not an error since partial matching is ok here but not good practice. Fixes issue #28 reported by Marcel Ramos. - changed the saved value in "tests/testthat/dummyArticle.rds" used in 'test-bib.R' with a value obtained with R-devel r84896 n previu versins of R there wasasuperfluous final ' .'). - in some cases when square brackets were requested, rather than round ones, `\insertCiteOnly` was using closing round parenthesis. - in some cases `\insertCiteOnly` was not handling well the last cite when it was followed by free text. # Rdpack 2.4 - new Rd macro `\insertCited{}` works like `\insertAllCited` but empties the references list after finishing its work. This means that the second and subsequent `\insertCited` in the same help page will list only citations done since the preceding `\insertCited`. Prompted by issue #27 to allow separate references lists for each method and the class in R6 documentation. - It is no longer necessary to remove backslashes from `\&` and similar in bibtex files (e.g. in "John Wiley \& Sons"). The backslash was appearing in the rendered pdf manual but R-devel's checks started to warn about it recently with something like `checkRd: (-1) pcts-package.Rd:287: Escaped LaTeX specials: \&` (starting June 2022). This could be avoided by removing the superfluous backslash in the bib file but this is annoying since this is proper syntax for the latter. Concerned packages should rebuild the tarball with Rdpack (>= 2.4) or remove the offending backslashes from their bib files. (addresses issue #26) # Rdpack 2.3.1 - in Rd macro `\insertCite`, two or more accented Latin characters were rendered with superfluous curly braces, see issue#25 (reported by Manuel López-Ibáñez) and https://stat.ethz.ch/pipermail/r-devel/2022-April/081604.html. # Rdpack 2.3 - reverted the change in v2.2, since a further fix in R-devel, https://stat.ethz.ch/pipermail/r-devel/2022-March/081570.html, made it unnecessary and dependent on the versions of R used to build and install a package. This concerns developers who use the Bibtex related macros - they should not build their package with v2.2 of `Rdpack` and could require `Rdpack >= 2.3` to ensure that users installing their package don't do that accidentally with `Rdpack 2.2`. # Rdpack 2.2 - a change in R-devel (around built r81914, March 2022) in the processing of `\doi` Rd macros resulted in warnings from R-devel's checks for packages that use Rdpack built with the released versions of R. This fixes it. (fixes #24) # Rdpack 2.1.4 - Rdmacro `\insertCite` gets a new feature allowing to drop parentheses for parenthesised citations, analogous to natbib's `\citealp` in latex. This makes it possible to use markup around the citations outside the arguments of the macro. This fixes github issue #23 by @ms609. - updated vignette "Inserting_bibtex_references" and other documentation. - the pkgdown site now has a `Search` button on the navigation bar. # Rdpack 2.1.3 - fixed a test that was failing with versions of rbibutils before v2.1.1 (issue reported by Andreas Tille). - if the version of rbibutils is greater than v2.2.5, parsing bib files with `rbibutils::readBib` now uses `texChars = "Rdpack"`. This ensures proper rendering of `\'i` in references (by converting `\'i` to `\'\i` which base R renders correctly). For detailed discussion of this see issue GeoBosh/bibutils#7 and NEWS.md in rbibutils v2.2.4 and v2.2.5. # Rdpack 2.1.2 - Rdmacros generating references now drop the `URL` field if a `doi` field generating the same URL is present. This avoids repetition of the URL since rendering the `doi` field produces the URL anyway. - now references with identical authors are sorted by year. - fixed rebib() to process doi's properly. - now checks on github (using github actions) are done on the three major platforms for the following versions of R: release, devel, oldrel, and 3.3. - now a warning (rather than error) is issued if package 'testthat' is not available for tests. - now bibtex files are parsed with option `direct = TRUE` when the version of `rbibutils` is >= ‘2.1.2’. This fixes GeoBosh/rbibutils#3 for Rdpack users (although that needs fixing also for `direct = FALSE`). # Rdpack 2.1.1 - In `viewRd`, the default for the help type now is `options("help_type")` (previously the default was `"text"`). - for `roxygen2` users, added a note in README and `Rdpack-package.Rd` not to indent by exactly four spaces `\insertAllCited{}` relative to `@references` when markdown mode is activated. This is to avoid it being translated by `roxygen2` as verbatim (`\preformatted`) text, see issue (#18). - moved package `gbRd` to Suggests. - fixed uses of \dots in several examples (necessitated by a change in R-devel circa February 2021). # Rdpack 2.1 - dramatic speed up of processing of bibliography references, most noticeable for users with large number of help pages and large `REFERENCES.bib`. (prompted by Kisung You, issue #17) - amended the warning message from bibliography macros to mention duplicated keys. - added entry for `rbibutils` in REFERENCES.bib. - corrected wrong citation of `rbibutils`. # Rdpack 2.0 - removed `bibtex` from `Suggests` and elsewhere. # Rdpack 1.1.0 (not on CRAN) - imported `rbibutils` and made suitable adjustments to the code. - moved `bibtex` to `Suggests` (since `bibtex` has been orphaned for several years). # Rdpack 1.0.1 (not on CRAN) - removed a documentation link to a function in `gbutils`, which is not among the dependencies of `Rdpack`. This was raising a NOTE on one of the CRAN testing machines. # Rdpack 1.0.0 - `viewRd()` now loads also Rd macros declared by the package to which the rendered Rd file belongs. Previously only macros from `Rdpack` were loaded but now there is at least one other package, `mathjaxr`, which defines Rd macros. - moved `grDevices` to `Suggests`. - edited some documentation files. # Rdpack 0.11-1 - in documentation of S4 classes, such as `"classname-class.Rd"`, `reprompt()` was sometimes inserting entries for slots already listed in the Slots section. The same bug was causing the new slots not to be reported properly to the user. - in some cases `reprompt()` failed to process properly `\S4method` entries in the Usage section of Rd files. Now fixed. - `reprompt()` now handles `\S4method` statements for replacement methods. As for other functions and methods (S3 and S4), it is sufficient to put a declaration with empty argument list in the Usage section and `reprompt()` will insert the correct formal arguments for the method (they may be different from those of the generic). - `reprompt()` now gives a more helpful error message when `type` is invalid. - corrected some minor typo's in the documentation. - README and the documentation of `reprompt()` and `Rdpack-package` now give more details on `reprompt()`ing replacement functions. - README.md and README.org now give the correct `install.packages` instruction for CRAN (pull request #10 from @katrinleinweber). - some examples were leaving a stray file, `dummyfun.Rd`, after `R CMD check`. # Rdpack 0.11-0 - Updated the vignette about `\insertFig`, `\printExample` and `\runExamples`, to reflect the lifting in `R 3.6.0` of some limitations of Rd processing in previous R versions. - Vignette 'Inserting BibTeX references' now includes a section on bibliography styles. This section was previously only in README. - The fix in Rdpack 0.10-3 (see below) for an issue introduced in R-devel in Oct 2018 will be made permanent, at least for now. This fix resolves also a similar issue in package `pkgdown`, see the discussion at https://github.com/GeoBosh/Rdpack/issues/9 for details and further links. # Rdpack 0.10-3 (not on CRAN) * fixed issue#9 (reported by by @aravind-j) appearing when a package is built with R-devel (since about Oct 2018) causing references by `\insertAllCited{}` to appear in a single paragraph in the `html` rendering of the Rd documentation. # Rdpack 0.10-2 (not on CRAN) * added pkgdown site to DESCRIPTION. * README and the vignette about evaluated examples now state that R-devel no longer gives warnings about `\Sexpr` not being a top level section. This means that macro `runExamples` which creates section 'Examples' containing code and results of evaluation will be useable in CRAN packages. * new function `Rdo_fetch()` gets the Rd object representing a help page from an installed or source package. It works also for packages under devtool's developer's mode * The site created with pkgdown contains fewer errors now. (Note that the documentation builds without error with R's tools). * Started moving tests from my local setup to testthat. # Rdpack 0.10-1 * removed redundant references from REFERENCES.bib (they were leftovers from testing). # Rdpack 0.10-0 (not on CRAN) * updated vignette 'Inserting_bibtex_references'. # Rdpack 0.9-1 (not on CRAN) * now `REFERENCES.bib` is read-in using the declared encoding for the corresponding package. If there is no declared encoding, "UTF-8" is assumed. * Now macros `\insertCite` and `\insertCiteOnly` use the correct `results=rd` instead of `results=Rd`. This was not catched by `R`s building tools but caused errors when processed with `pkgdown::build_site()`. Fixes issue#8. Also fixes r-lib/pkgdown#784. Thanks to [Jay Hesselberth](https://github.com/jayhesselberth) for uncovering this. * now references produced by the citation macros for BibTeX entries of type `@book` and `@incollection` treat field 'series' similarly to other BibTeX styles, including JSS (issue#7 raised by Kisung You). Note that even though the underlying base R tools are based on JSS, they treat this field differently. * Bugfix: now Rd macro `\printExample` evaluates the expressions in the correct environment. * help page of `get_usage()` gets a fairly complete Details section with numerous evaluated examples. * now `run_examples()` escapes `%` by default, before returning the text. This is needed for text that is to be included in an Rd file. It can be turned off by setting the new argument `escape` to `FALSE`. * now `reprompt()` gives a more informative error message if an Rd file describes a non-existent S4 class. This is not captured by `R`s tools. It can happen during development if a class is removed. * now reports printed by `reprompt()` about methods documented in Usage sections, but no longer existing, are more readable. This is due to a new print method for (the mostly internal) class "f_usage". * Many features of Rdpack are best demonstrated on a package. The new package RdpackTester under `./inst/examples` now makes this easier. * now the help page "predefined.Rd" does not print some tables twice in the pdf manual. (This was due to using `\if{latex}{}{}` instead of `\ifelse{latex}{}{}` for those tables.) * also in "predefined.Rd", removed illegal use of vertical bars (in column specifications of tabular environments) from the pure LaTeX code in the `\ifelse` clause(s) and wrapped them in `\out{}`. * in "get_sig_text.Rd", replace `help()` with `utils::help()` to avoid warnings from more stringent `R CMD check`. Similarly, in "Rdpack-package.Rd" replace `packageDescription()` with `utils::packageDescription()`. This may be needed in `\Sexpr`'s more generally (__TODO:__ check if these would still be needed if the symbols are imported by the package.) # Rdpack 0.9-0 * some brush-up of the documentation for the changes since version 0.8-0 of the package. # Rdpack 0.8-4 (not on CRAN) * now simple mathematics in BibTeX entries is rendered natively, no need to replace dollars with `\eqn{}`. # Rdpack 0.8-3 (not on CRAN) * new macro `\printExample` for inclusion of example computations in narrative sections, such as `Details`. The code is evaluated and printed similarly to `R` sessions but the code is not prefixed and the output is prefixed with comment symbols, eg. ``` 2+2 ##: 4 ``` * new experimental macro `\runExamples` for use as top level section in an Rd file as a replacement of section `\examples`. `\runExamples{code}` evaluates the code and creates section `\examples` containing the code and the results (similarly to `\printExample`). So, `\runExamples{2 + 2}` produces ``` \examples{ 2 + 2 ##: 4 } ``` The generated section `examples` is processed by R's documentation tools (almost) as if it was there from the outset. * new experimental macro `\insertFig` to create a figure with `R` code and include it in the documentation. The related macro `\makeFig` just creates a graphics file, which can be included with the standard Rd command `\figure`. * new vignette gives a brief description of the new macros. # Rdpack 0.8-2 (not on CRAN) * Now text citations use "et al." when there are three or more authors. (Issue#6 reported by Timothy P. Bilton) # Rdpack 0.8-1 (not on CRAN) * in this file, added backticks to `\insertRef` and `\insertAllCited` (see below) - in the rendered `News` on CRAN the backslashed words had disappeared. # Rdpack 0.8-0 * `\insertRef` and `\insertAllCited` macros now support `bibstyles` for formatting references (feature requested by Jamie Halliday, issue#5). Use `Rdpack (>= 0.8)` in `Imports:` to use this feature. Currently only long author names are supported but complete support for styles can be added trivially if requested. * updates to the documentation, in particular the bulk of Rdpack-package.Rd was from 2011! # Rdpack 0.7-1 (not on CRAN) * improvements to handling of free form citations in textual mode: * (bugfix) now the whole citation is not parenthesised in textual mode, * the handling for textual mode was incomplete in that additional text after the citation was not put inside the parentheses along with the year. * updates to the documentation. * fix a bug in `Rdo_locate_core_section()`. # Rdpack 0.7-0 * consolidated the changes introduced since the previous CRAN release of Rdpack (it was 0.5-5) in preparation for the next release. Users of the new macros for citation can use `Rdpack (>=0.7)` in the `Imports:` field of file "DESCRIPTION" to ensure that they are available. * comprehensive overhaul of handling of errors and warnings during processing of references and citations. In particular, such errors should (in most cases) produce only warnings during `R CMD build` and `R CMD INSTALL`, and not prevent the package from being built and installed. * Unresolved BibTeX keys produce warnings during building and installation of the package, but not errors. Dummy entries are inserted in the documentation explaining what was amiss (currently with 'author' A Adummy). # Rdpack 0.6-x (not on CRAN) * new Rd macros for citations * `\insertCite` inserts citation(s) for one or more keys and records the keys for `\insertAllCited` (see below). * `\insertCiteOnly` is similar to `\insertCite` but does not record the keys. * `\insertNoCite` records the keys but does not produce a citation. * `\insertAllCited` prints a bibliography including all references recorded by `\insertCite` and `\insertNoCite`. * new entries in this file will use markdown syntax. * updates to the documentation. # Rdpack 0.5-7 (not on CRAN) * `get_bibentries()` gets a new argument "everywhere". When is is TRUE, the default, unescaped percents are escaped in all bibtex fields, otherwise the replacement is done only in field "URL". * removed several `print()` statements which were accidentally left in the code in v. 0.5-6. * updated help page of `get_bibentries()` and included examples. * cleaned up the imports in NAMESPACE. # Rdpack 0.5-6 (not on CRAN) * `insert_ref()` and Rd macro `\insertRef` should now work ok in the presence of percent encoded symbols in URL field of a BibTeX entry. Closes issue "Unexpected END_OF_INPUT error (URL parsing?)", see [Rdpack issue 3](https://github.com/GeoBosh/Rdpack/issues/3), raised by [jdnewmil](https://github.com/jdnewmil). * `get_bibentries()` now takes care of percent encoded symbols in URLs. It now returns an object from class "bibentryRd", which inherits from "bibentry" but has its own print method which escapes or unescapes the percent signs in URLs depending on the requested output style. This was also reported by by [jdnewmil](https://github.com/jdnewmil) in issue#3 referenced above. * `get_bibentries()` now tries to load the `bib` file from the development directory of argument "package", in case it is in development mode under "devtools". (Even though the search is with `system.file()`, which `devtools` replaces with its own version, the bib file still needs to be looked for in "inst/", i.e. it is not in the root directory as is the case in installed packages.) # Rdpack 0.5-5 * Streamlined the help page of `reprompt()` and `Rdpack-package`. * new argument, `edit`, in `reprompt()` opens the Rd file after updating it. * new function `ereprompt()` (`e' for _edit_)* opens `reprompt()` with suitable defaults to replace the original Rd file and open it in an editor, otherwise equivalent to `reprompt()`. * now if `infile` does not exist, `reprompt()`, and hence `ereprompt()`, strips the directory part, finds the root of the package directory, and looks for the file under `man/` (this uses package `rprojroot`'). In particular, if the working directory is anywhere under the package root, `infile` can be simply the name of the Rd file, without path. * now README.md is generated from README.org. I changed the layout and amended the information in it. * README.* now get links to [georgisemacs](https://github.com/GeoBosh/georgisemacs) for an emacs function to `reprompt()` the Rd file at point. * `viewRd()` now works also when the file is from a package under devtools' development mode on any platform (e.g. RStudio, Emacs/ESS, Rgui). * new RStudio add-in `Reprompt`, contributed by Duncan Murdoch. If the file being edited in the RStudio's code editor is an Rd file it calls `reprompt()`. If the file is as R source file, it looks for the help page of a selected object name and works on it if found, otherwise creates one. # Rdpack 0.5-4 (not on CRAN) * added the version of `Rdpack` to the abstract of the vignette. This seems more informative than giving the compilation date. * now `reprompt()` doesn't give spurious warnings about unknown Rd macros when the Rd file contains user defined Rd macros. These warnings were harmless and rare, but alarming and annoying. * fixed a bug in `inspect_args()` which caused the warning _"In is.na(x) : is.na() applied to non-(list or vector) of type 'NULL'"_ in `reprompt()`, when the signature of a function in "Usage" section was empty. # Rdpack 0.5-3 * The warning message about a missing reference key now appears also in the respective help page. # Rdpack 0.5-2 (not on CRAN) * added the github url to DESCRIPTION. * now give a more informative warning if a key is missing from REFERENCES.bib (thanks to Kisung You for suggesting this). # Rdpack 0.5-1 * an example was not restoring the working directory. # Rdpack 0.5-0 (not on CRAN) * moved gbRd from Depends to Imports and adjusted some examples to use `tools::parse_Rd()` rather than `parse_Rd()` (before this was not necessary since 'gbRd' _depended on_ 'tools'). # Rdpack 0.4-23 (not on CRAN) * new function `viewRd()` parses and shows an Rd file in a source package. May be particularly helpful for devtools developers. * revamped the vignette, added additional explanations of possible issues. * new functions `makeVignetteReference()` and `vigbib()` generate Bibtex references for vignettes in a package. # Rdpack 0.4-22 * Added the requirement to **Import Rdpack** to the help page of `insert_ref()`. (It was out of sync with the vignette.) * Updated Description in DESCRIPTION, which was also out of sync with the vignette. * Bug fix in the vignette: changed `\@references` to `@references` in the roxygen2 example. # Rdpack 0.4-21 * Edited and amended vignette _"Inserting_bibtex_references"_, including: * additional explanation and an example, * requirement to import Rdpack and a mention of travis etc. * paragraph about devtools. * changed the URL for parse_Rd.pdf in REFERENCES.bib to https. # Rdpack 0.4-20 * cleaned up some minor CRAN issues. # Rdpack 0.4-19 (not on CRAN) * new facility for inserting references from BibTeX files - just put the line: RdMacros: Rdpack in the `DESCRIPTION` file of your package and the references in `inst/REFERENCES.bib`. Then put `\inserRef{key}{yourpackage}` in documentation chunks to insert item `key` from the bib file. This works with both manually created Rd files and roxygen comments, see the documentation for details. # Rdpack 0.4-18 * from now on, put next to versions published on CRAN (as above) * a minor correction in file NEWS. # Rdpack 0.4-17 (not on CRAN) * In file DESCRIPTION, changed reprompt and rebib to `reprompt()` and `rebib()`. # Rdpack 0.4-16 (not on CRAN) * don't export `parse_text` * corrected bug in reprompt for S4 classes - new slots were not handled correctly (see `slots.R` for details). * in reprompt for S4 methods: if the methods documentation describes methods that do not exist, print an informative message for the user. (Such methods are also printed for debugging purposes but in non-user friendly form.) - included `methods` in `Imports:` - around R-devel version 2015-07-01 r68620 not including it triggers warnings) # Rdpack 0.4-8 (not on CRAN) * new functions `.whichtageq` and `.whichtagin`; replaced most calls to `toolsdotdotdotRdTags` with these. * removed `toolsdotdotdotRdTags` # Rdpack 0.4-7 (not on CRAN) * removed `:::` calls from code; copied some functions from `tools` to achieve this (see "threedots.R"). Renamed the functions replacing `:::` with dotdotdot. * export by name (not the generic export pattern); preparation for more selective export of functions in the future. * new functions: `Rdo_get_argument_names`, `Rdo_get_item_labels` # Rdpack 0.4-5 (not on CRAN) * dependence `bibtex` becomes "Imports". `tools` and `gbRd` remain (for now) "Depends" since functions from them are used in some examples without `require()`'s. * `rebib()`: now `outfile=""` can be used to request overwriting `infile`. (a small convenience; before the change, one could do this by giving the `outfile` and `infile` the same values.) * Bug fix: `predefined.Rd` contained `\tabular` environments with vertical bars, `|`, in the format specification. This is not documented in "Writing R exts" but works for LaTeX and remained unnoticed by me and R CMD check. However, rendering the help page for the objects documented in "predefined.Rd" gave an error in html and text mode. Package installation failed only if html was requested at build time. * small changes in the documentation # Rdpack 0.4-4 # Rdpack 0.4-1 (not on CRAN) * new major feature: processing references from Bibtex files. The top user level function is `rebib()`, which updates section "references" in an Rd file. `promptPackageSexpr()` has been updated to use this feature. `inspect_Rdbib()` can be used in programming. * new auxiliary functions for work with `bibentry` objects. * new convenience programming functions for Rd objects. * some small bug fixes. * some gaps in the documentation filled. # Rdpack 0.3-11 (not on CRAN) * `reprompt()` was not handling properly S4 replacement methods. Changed the parsing of the arguments to rectify this. Some other functions also needed correction to handle this. # Rdpack 0.3-10 * `Depends` field in DESCRIPTION file updated to require R 2.15.0 or later (because of a few uses of `paste0()` in recent code). # Rdpack 0.3-8 * first public version